The machine is used for one-sided edging of boards, beams, battens and parquet boards. One-sided circular saw enables cutting in both directions, which makes it a very efficient machine as there are no idle runs.
Professional head band saw with 4,6 extension track 2,3m
The feeder can be adapted to any model of the sawing-splitting machine with installed hydraulics. If such an adaptation of the hydraulic system is not possible, a custom-made hydraulic supply unit must be implemented.
This saw is designed for cutting worn or damaged pallets to recycle pallet boards using precise cutting of nails connecting the board with the runner. The pallet cutting saw allows recycling about 4 m3 of boards per one shift to reuse them in the production of pallets.
Diameter of the log to be worked: 850 mmWeight of the log to be worked: up to 5 tonnesStandard cutting length: 5800 mm
This machine is designed for two and three-side open flitches. It allows cutting up flitches into boards or square wood. The sawing machine is available with one to three saw heads, which allows obtaining up to three boards or squares with one cut, considerably increases the production, efficiently replaces the multi-saw machine, and offers a very small...
This multi-saw machine is used for longitudinal cutting of timber and plank piles. The machine is equipped with double advancing rollers on the infeed and outfeed side, independent upper clamps at gas actuators, ensuring smooth operation of the machine in the case of long and heavy plank piles and uneven surfaces of the plank piles (waviness and thickened...
Divripu zāģis This machine is used for double-side edge sawing of boards and logs. The machine features automatic speed adjustment, smooth advance combined with lasers marking cutting lines for an optimum use of the material with no waste produced.Divripu zāģis
This machine is suitable for log woodworking. The machine output depends on the thickness of the log to be sawn and the required thickness of sawn wood. On average, it is 1 – 2 m3/h.
This machine is designed for stacked and thin sawn woodworking. The application of four saw heads allows cutting out three elements with one pass of the log. If the feeder guide is changed, single-sided or two-sided edging is possible.
An industrial wide-band sawing machine adjusted to process logs, designed mainly for big sawmills and companies, where the accuracy and quality of the material obtained - for example oak, hornbeam or beech - is important.
The BBS 600 B log bandsaw is equipped with gasoline engine. The gasoline drive model option is perfectly suitable for transport between sites. The brilliant price to benefit ratio makes this model perfect for agricultural purposes, forestry, carpentry etc.
This machine is suitable for working on stacked and thin sawn timber. It cuts out double-sided open flitches with a thickness of up to 250 mm. If the feeder guide is changed, single-sided or two-sided edging is possible.
Diameter of the log to be worked: 900 mm (optionally 1100 mm)Weight of the log to be worked: up to 5 tonnesStandard cutting length: 8500 mm