CNC 1325 frēzēšanas un gravēšanas iekārta 3.5kW
13 301,20 €
AR PVN
1325STANDARD-3.5
| Technical data: |
| Spindle: 3.5kW air-cooled |
| Working surface X / Y / Z: 1300mm x 2500mm x 200mm |
| Software: for CAD / CAM design Artcam open |
| Program resolution: 0.01mm |
| Mechanical resolution: 0.04mm |
| Max speed in slow runs: up to 33m / min |
| Max. work speed in the material: up to 25m / min |
| Inverter: 3.7kW |
| Dimensions of the machine: 3.08x2.03x1.95m |
| Features: |
| Hybrid table, i.e. 4-section vacuum + T-Grooves |
| The frame of the machine is fully welded, relaxed and only milled - which ensures the accuracy of machining and work stability |
| Machine control using the Mach3 system in Polish (requires a computer to be connected via USB) |
| The tool height sensor is included in the set |
| Central oil lubrication system - for trolleys and guides on standard equipment |
| The driving system is a high-performance eight-wire stepper motors + controller |
| Transmission is carried out via a rack and slant - leveling play |
| Helical drives with an open feedback loop. Rotation of 1.8 degrees, 4.2 A, 8 wire, 1.2 Ohms, 6.5mH inductance, holding torque 6N.m, Rotor inertia 2700 g-cm2 |
| The machine in all axes (X, Y, Z) moves on high-class HIWIN guides and linear bearings |
| Dual hybrid stepper motor on both sides on the Y axis |
| Wiring the machine with high-class anti-fire cables. Electric wires used for milling machine construction are adapted to bending and are secured against deformation |
| Drivers of stepper motors strong 860H - 4.2A |
| Z axis on the TBI ball screw |
| Pneumatic positioners - enabling material placement always in the same place - as standard (bottom left corner - the required compressor from the customer) |
4 produktu tajā pat kategorijā:
